Automatic Application, Drying, and Finishing Press – Simplified Pretreatment Process



When performing white inkjet printing on dark colored t-shirts, pretreatment is essential to ensure even application of the pretreatment agent on the printing area. Without it, ink application can be uneven, affecting the print quality. Traditionally, manual pretreatment required a certain level of skill.

The automatic pretreatment machine "PRETREATmaker LINE" for garment printers automates the entire process of applying the pretreatment agent, drying, and finishing press, eliminating the need for specialized skills. It ensures consistent pretreatment results for each piece, even in mass production.



In previous methods, each stage - applying the pretreatment agent, drying, and pressing - required separate manual handling, which was somewhat analog. With the "PRETREATmaker LINE," you simply set the garment and start the operation, and all stages are processed automatically. This significantly reduces the labor time required per operator for the pretreatment process.

Additionally, the machine's rotating structure allows for setting and removing garments from the same position, eliminating the need for the operator to move between steps. A single operator can manage the machine, allowing for several times faster processing than previous methods and drastically reducing the total cost per garment.

Approximately 6 Times Faster Pretreatment Compared to Manual Methods



With the "PRETREATmaker LINE," even for variable printing, pretreatment can be completed 6.24 times faster than manual methods. Not only does it standardize pretreatment quality, but it also significantly improves productivity.

Pretreatment Method | Number of Garments Processed Per Machine

PRETREATmaker LINE: 156 garments/hour

Manual Spraying: 25 garments/hour - The PRETREATmaker LINE figure represents the maximum value based on settings, and the manual spraying figure is based on actual measurements by our staff.



The PRETREATmaker LINE 11-6 is an automatic pretreatment machine for garment printers with dimensions of 516 x 200 x 180 cm and a weight of 1460 kg. It operates on AC400V across three units, with a rated output of 33 kW, power consumption of 45 A, and air consumption of 15 L per machine cycle. It features a main fuse and a noise level below 70 dB(A). The machine supports a print size of 40 x 54.5 cm and has a warm-up time of 25 minutes. The drying tunnel accommodates a maximum height of 30 mm, reaches an air temperature of 250°C, an infrared temperature of 350°C, and has a heating time of 100–120 seconds. The heat press applies a maximum pressure of 6 bar, reaches a maximum temperature of 220°C (optimal at 180°C), with a plate size of 45 x 56 cm and a heating time of 1–25 seconds.

The "PRETREATmaker LINE" automatic pretreatment machine helps drive down costs and increases output. Whether you're looking to enhance the quality of your prints or scale your operations, this machine is the key to achieving your goals.
--------
DIGITAL SBC VIETNAM
Over 22 years of experience in leading supplier
(Printer-Supply-Service)

Business Representative
Mr Tình Vũ - Contact/Zalo: 0918 775 548

◉ HCM: 182C Le Thi Bach Cat, Ward 11, District 11
◉ Danang: 123 Vo Chi Cong, Hoa Xuan, Cam Le
◉ Hanoi: B5 Lot 15 Urban Dinh Cong, Hoang Mai